|
Chapter 5
Dropping it in! Well, I dialed in the bell-housing and screwed er' together. Next came dropping it in the car....
hoisted engine
hoisted engine
engine in car- front engine
1
2
3
FUTURE ENTRIES:
I will be continuing this saga after assembling the pieces above over the next few weeks. At this point, my big questions will be:
1) How much gating is necessary?Ted says I've got enough. 2) Where is the best place to take off an oil line to lubricate the turbo. I solved that problem.... 3) Which carburetor will turn out to be the best one. 4) Whether or not I should invest in four oxygen sensors, one over each portion of the exhaust manifold since this is an unusual installation which may require some careful fiddling to prevent melt-down. 5) The Edmunds aluminum head is about 8.5:1 C.R. and is really cool, however I'm concerned about leakage and detonation. Should I be concerned? Apparently so.....
